BOOSTER 1012 Opening Speed_Standard while closed position of the

while closed position of the gate still requires a stopper fixed to the ground)

The self-locking properties of the spindle increase the protection against a dangerous and unauthorized “pressing” of the gate and the otherwise necessary e-locks for the final positions can be omitted

blinks slowly while opening electric lock output

With it's unique DUCATI's radio rolling code

blinks slowly while opening electric lock output √  outpur 12Vdc ( 24Vdc)  compatible to electrik lock with booster only safety beam-photocells input (NC contact) √ NC normally closed contact Note: use of special low consumption photocells is recommended: use only DUCATI low consumption photocells model 7120 full cycle START input (NO contact) √ pedestrian cycle START input ( NO contact) √ Emergency STOP button input (NC contact) √

BOOSTER 1012 Opening Speed_Standard while closed position of theDescription BOOSTER 1012 comes with a microswitch coil that allows the following functions to be added to the E LOCK 1012 electric lock: to transforms dc current into ac current, allows to operate ac electric locks by dc electronic board outputs. This way ac electric locks can be operated also by back up battery solar power supply. BOOSTER 1012 is installed directly on the frame of E LOCK 1012; it is hidden beneath its case cover and does not impair