SEAT SQUAB FOAM - 1973-75 models & GT6 MK.III- fits LH & RH seat frames Saloon 1958-60 The centre insert section on

The centre insert section on the door and rear quarter panels is made from a basketweave vinyl material that matches the material used on the 1275GT seat covers

Wheel arch covers

Newton Commercial Part No – CK6006

This gives the base more definition

We also have available a non moulded carpet in Autumn Leaf and Navy - this is made in our tufted style carpet and comes with a flat tunnel section that will need to be glued to give the best possible fit

SEAT SQUAB FOAM - 1973-75 models & GT6 MK.III- fits LH & RH seat frames Saloon 1958-60 The centre insert section onThe squab foams are made up of hard foam on the side bolsters and chip foam on the rear section that is glued to the metal seat frame. The split centre section is made from a much softer foam. The split, cut three quarters of the way up the foam is to allow a calico flap attached to the seat cover to be pulled through to tension the cover when fitted. Adhesive is not supplied we suggest you use a contact adhesive to glue the foam to the metal frame.