SD 120-3-NO107 - RENOLD 1 1/2 Inch Pitch SD Roller Link SLFE 1.3/8 Pressed Steel Flange Bearing Unit NU 4 24 M Metric

NU 4 24 M Metric

This 3211B 2RSNRTN bearing is a metric double row angular contact bearing with a rubber seal on both sides of the bearing

523 15 Double Direction Thrust Bearing 60mm - Bore Size Sheet Steel Cage

This LWHT35C2R480T1HS2 is a high rigidity ball type series linear way with a rail length of 480mm

CRBH 250 25 A UU High Rigidity Type Crossed Roller Bearing 250mm - Bore Size 25mm - Width Model Code With Counter-bored Moutning Holes on Both Inner and Outer Ring in the Same Direction Sealed Type

SD 120-3-NO107 - RENOLD 1 1/2 Inch Pitch SD Roller Link SLFE 1.3/8 Pressed Steel Flange Bearing Unit NU 4 24 M MetricFor use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over after the plate is fitted. Press fit connecting links should only be used once; new links must be used to replace dismantled links. (See Riveting Chain Endless' for full instructions).