Jeep JK, JL, JT (Front or Rear) Transfer Case 1350 CV Driveshaft End Yoke Kit. Will also fit the (Front or Rear) of a TJ with a Rubicon Transfer Case, 32 Spline, Includes 4 Bolts (PM3112-CV01GK) DAN706527X-HD Note: This driveshaft is not

Note: This driveshaft is not compatible with 392 models

1310 Rear JL Sahara

You've selected the kit that includes the U-bolts

use the drop down menu to select the correct configuration

Inside the socket is a spring that preloads the ball (similar to the upper kingpin in a Dana 60)

Jeep JK, JL, JT (Front or Rear) Transfer Case 1350 CV Driveshaft End Yoke Kit. Will also fit the (Front or Rear) of a TJ with a Rubicon Transfer Case, 32 Spline, Includes 4 Bolts (PM3112-CV01GK) DAN706527X-HD Note: This driveshaft is notYou've selected the hardware to save your life! You made the right choice getting the special bolts, and will soon be saving a half hour of your LIFE every time you remove OR install the driveline. The small 12 point head gives you enough space between the yoke and the bolt to fit a 1 4" ratchet or ratcheting wrench. If you use bolts from the hardware store, they'll have a 1 2" wrench head on them, and you'll be removing 24 threads per inch a quarter